If you created custom fonts on the system where Corda® 7 is installed, the fonts are automatically installed in the correct location. If the custom fonts were created elsewhere, install them on the Corda 7 system using one of the following processes:
To install pre-converted fonts using Corda Server™ Administrator
Start the Corda Server on the computer to which you want to upload the font.
From the computer that has the custom fonts, log in to that server's Corda Server Administrator.
Log in to Corda Server Administrator by opening a Web browser and going to http://<server address>.com:2004/casapp/administrator, where <server_address> is the host name of the computer to which you want to upload the fonts. You must log in to access Corda Server Administrator.
Go to the Image Templates / Font Files > Upload Font Files screen.
Under Font File to Upload, enter the path to the font file you want to upload or click Browse to locate it.
This path is relative to the computer to which you are currently logged in. If you converted the custom font on this computer, it is in <product_root>\Resources\lib\fsfiles.
Click the Upload File button.
Restart any Corda programs you are running.
Upon restart, the fonts are available for use.
To install pre-converted fonts manually
To install fonts to a system that is only running Corda Builder™, or if you do not have access to Corda Server Administrator, follow this procedure:
Locate the pre-converted fonts.
These fonts are contained in files with an .fsd extension. By default, they are in <product_root>\Resources\lib\fsfiles .
Copy these fonts to <product_root>\Resources\lib\fsfiles on the system running Corda Builder.
Restart any Corda 7 programs that are running.
Upon restart, the fonts are available for use.